· Magnetic field Injection Molding Machine
· Ceramic Injection Molding Machine
· Injection Molding Machine
· Magnetic plastic extrusion molding machine
· Plastic magnetic granulator
· Mold
· Magnetic Separator
· Remover
· The printer and copier bars
· Plastic magnetic rotor, the magnetic ring
· Injection ferrite
· Injection NdFeB
· Sintering ferrite magnetic tile, magnetic ring
· NdFeB sintered
· Bonded NdFeB
· Precision Injection Parts
· Magnetic gifts, magnetic plastic


Magnetic Separato：

BT-FKC-CTL-Series Permanent Magnet Dry Magnetic Separator for PowderOre　

　
　　TL-Series permanent magnet dry magnetic separator for powder ore is a high-efficiency ore dressing plant newly developed by our company and may be widely in metallurgical mines and other industries. The magnetic
separator is characterized by a turbulent magnetic field and high separation factor, advanced structure, light weight, reliable operation and convenient maintenance. The magnetic separator is very suitable for the districts that are
short of water so that water resource may be saved and ore dressing coasts may be reduced. It develops a new way for mining and utilization of magnetite. The separator may be driven by diesel engine. Therefore, it may be used in the districts lacking of electricity. The magnetic separators with different magnetic induction intensities that are
used for different minerals may be developed according to user’s specific need besides the existing pattern products. The existing series products may meet the needs of concentrators of large, medium and small-sized mines. We welcome users to come to our company for business contact. Our company has industrial prototypes and may do pilot tests for users. The magnetic separator is mainly used in following occasions:
1. used for preconcentration of low-grade ores. It may increase ore grade to be ground and reduce ore dressing costs;
2. used for reconcentration of tailings and recovery of relatively concentrated tailings in the dry slope section of the tailings dam;
3. used for purification by magnetic separation for dry powder of pyrite cinder;
4. used for iron removing of non-magnetic materials which has an obvious effect and low costs of ore dressing;
5. used for purification operation of concentrates of magnetic separation plants. It may reject lean associate ore body and gangue in the iron concentrates and to increase concentrate grade and technical additional value of dressing precuts.
Specifications and Main Technical Performances of CTL Series Permanent Magnet Dry Magnetic SeparatorforPowderOre。

Main technical specifications and performance models

 

CTL-0618

CTL0612

CTL0609

CTL-0821

CTL-0818

CTL-0815

CTL-0812

Drum diameter*length(mm)

600×1800

600×1200

600×900

750×2100

750×1800

750×1500

750×1200

Rotational speed of the drum (r/ min)

50－150

50－150

50－150

30－150

30－150

30－150

30－150

Magnetic induction on drum surface in separation zone(mT)

〉 120

〉 120

〉 120

〉 120

〉 120

〉 120

〉 120

Upper limit of particle size of ore(mm)

7-0

7-0

7-0

10-0

7-0

7-0

7-0

Capacity(ton/unit*hour)

15-20

10-15

5-10

60-65

40-45

30-35

20-25

Weight of magnetic drum(ton)

1.4

1.0

0.8

3.0

2.5

2.1

1.8

Overall weight of plant(ton)

2.5

2.0

1.8

4.5

4.2

3.6

3

External dimension(mm)

3320 ×1020 ×1450

2620 ×1020 ×1450

2320 ×1020 ×1450

3780 ×1420 ×1680

3480 ×1420 ×1680

3220 ×1420 ×1680

2880 ×1420 ×1680


QJ-NCT Thickening Magnetic Separator
　　　 1、The Series magnetic separators are newly developed for adjustment of magnetic mineral density in upstream and downstream operation stages of magnetic separation plants. This magnetic separator is characterized by high recovery of strong magnetic minerals, large capacity and obvious thickening effect. Recovery of magnetic iron may reach above 99.5% and density may reach 50%~65% as feeding density is 20%~25%. Conventional dewatering tank and thickening pond occupying large area can be replaced by NCT thickening magnetic separator in thickening operation of strong magnetic minerals.
       2、Through optimization design, magnetic system angle of the magnetic separator is large and the magnetic force distribution is more rational, resulting in a large beneficiation space on small drum, so that a lot of magnetic concentrate may pass through and valuable minerals may be recovered as more as possible. The magnetic
separator unloads ore by a scraper in a non-magnetic zone. It is equipped with a washing pipe for concentrate and water amount may be adjusted so as to assure suitable density of the concentrate.
        3、The magnetic separator may stabilized ore pulp density and obtain high recovery as the density of feeding ore pulp changes greatly.


Main Technical Parameters of NCT Series Magnetic Separation

 

NCT1024

NCT1021

NCT1018

NCT1021

NCT1018

NCT1015`

Diameter of the drum (mm)

1000

1000

1000

800

800

800

Length of the drum (mm)

2400

2100

1800

2100

1800

1500

Rotational speed of the drum (r/ min)

15

15

17.6

17.6

17.6

17.6

  Magnetic induction intensity of drum surface (mT)

Average≥170 Strong magnetic field zone with rare earth magnetic material ≥220

Average≥170 Strong magnetic field zone with rare earth magnetic material ≥220

Average≥150 Strong magnetic field zone with rare earth magnetic material ≥220

Average≥150 Strong magnetic field zone with rare earth magnetic material ≥220

Average≥150 Strong magnetic field zone with rare earth magnetic material ≥220

Average≥150 Strong magnetic field zone with rare earth magnetic material ≥220

Working interval (mm)/td>

40-70

40-70

35-60

35-60

35-60

35-60

Treated ore pulp amount(m 3 /h)

210-240

180-210

160-180

160-180

145-160

115-130

Power of motor(kw)

4

4

3

3

3

3

External dimension (Length*width*heigh) (mm)

3690 ×2082 ×1689

3090 ×2082 ×1689

4490 ×1450 ×1405

3671 ×1450 ×1450

3371 ×1450 ×1405

3703 ×1450 ×1405

Overall weight of plant (KG)

6450

5500

5000

5000

4400

3670

PC Series Permanent Magnet Disc Tailings Magnetic Separator
　　 PC series permanent magnet disc tailings magnetic separator is often used for tailing recovering in a magnetic separation plant currently. It is characterized by simple structure, strong adaptability large capacity and adapting complex composition of tailings. This magnetic separator has a simple structure, reliable operation and convenient maintenance. It has formed series products and may meet the needs of concentrators of large, medium and small-sized mines. We welcome customers to come to our company for business contact.
    PC series the magnetic disc type tailing magnetic separation machine specification      type and main technical feature forever

Main Technical Parameters of PC series permanent magnet disc tailings magnetic separator

 

PC15--4~10

PC10--3~10

PC08--3~10

Diameter of the drum (mm)

1500

1000

800

Width of the drum (mm)

40

40

40

Rotational speed of the drum (r/min)

2

2

2

Magnetic induction intensity of drum surface (mT)

≥130

≥130

≥130

Working interval (mm.)

80

80

80

Capacity (dry ore t/h)

80-200

45-150

6-20

Power of motor (kW)

3--7.5

2.2--5.5

1.5--4

Overall weight of the equipment (KG)

2560--5560

1670--4470

500--1900



CopyRight @ 2003 Zhangjiagang Better Plastic Magnet Tech Co., Ltd
Add:Korea Industrial Park Zhangjiangang City Jiangsu Province.China Tel:0086-512-58458766/58423266
Fax:0086-512-58458658 Mobile:013812998766 http://www.bettermagnet.com
E-mail:market@bettermagnet.com